High temperature resistance CNC GREEN TAPE is to fix the pre-laminated glass with EVA FILM, and perfectly prevent the melt EVA FILM overflowing through laminated glass edges in the oven when heating.
If we use the CNC GREEN TAPE to seal the edges of pre-laminated glass to prevent the exit out of the EVA in the glass laminating oven, do we need to make some holes on the CNC GREEN TAPE for vacuuming?
It depends. If you don’t make holes on the CNC GREEN TAPE, and you make EVA laminated glass successfully without bubbles, then you don’t need to make holes on the CNC GREEN TAPE, so you can get the cleaner result of the edges of the final laminated glass. But if you don’t make holes on the GREEN TPAE, but you face bubbles in the corners or edges of the laminated glass, then it’s better you make some holes on the CNC GREEN TAPE to help pre-laminated glass vacuuming.
How Cnc Green Tapes Preventing Melt Eva Film Over Flowing Out of Laminated Glass Edges in the Oven by Peter Lin
What is the specifications of CNC GREEN TAPE?
25mm*66M/roll
30mm*66M/roll
40mm*66M/roll
50mm*66M/roll
Does CNC GREEN TPAE leave glues on the glass?
NO! No left remains of CNC GREEN TAPE on glass surface after peeling off. CNC GREEN TPAE can stand continuously heating more than 180℃with strong tear resistance.
May i have the CNC GREEN TAPE technical datasheet?
TECHNICAL DATASHEET OF CNC GREEN TAPE:
TESTED Item GREEN THERMAL TAPE
Color Green
Sealant Materials Silicone
Sealant Materials Thickness 0.035±0.005mm
Thickness of Tape Sheet 0.06±0.005mm
Temperature Resistance 180℃ Continuously heating
200 ℃ Discontinuously heating
Tear Strength 120 N/25mm
Adhesive Strength 7.5 N/25mm
Elongation 55%
Volage Resistance 5 KV
Insulation Resistance 1,000,000 MΩ
Insulation Grade F
