EVA Vacuum Glass Laminating Machine Operation 2
Control process setting: first set the technology data to the control plane, as picture below:
| glass thickness
(mm) |
Timing
(minute) |
55℃
low temperature timing (minute) |
130℃
high temperature (minute) |
Lower temperature timing
(minute) |
| 3mm+3mm | 5 | 10 | 40 | 45 |
| 4mm+4mm | 5 | 10 | 45 | 50 |
| 5mm+5mm | 5 | 10 | 45 | 50 |
| 6mm+6mm | 5 | 15 | 50 | 50 |
| 8mm+8mm | 5 | 15 | 60 | 60 |
| 10mm+10mm | 5 | 20 | 75 | 60 |
PS. H-hour, M-minute, S-second
7. lower glass temperature, at that time the temperature reach 130℃, then open the door, temperature lower sharply, when the temperature lower to 80~90℃, use fan to blow wind into the machine, make the temperature reach 40℃~50℃, then stop the lower temperature process, take out the glass. During lowering the temperature procedure, please don’t close down the vacuum pump.
All rights reserved by ★Silicone Vacuuming Bag /Sheet for EVA Glass Laminating Machine / Solar EVA Photovoltaic Panel Encapsulations(uc@ucolin.com / www.ucolin.com /umewe360@gmail.com)