Safety Glazing Products

======================================
GLASS MANUFACTURER MAIN PRODUCT                                  
======================================

Product Numbers:SC/CPP-4850mm

Product description:CPP/CPE casting film

Special design for the following applications

◆ CPP, CPE casting film

◆ High-barrier food packaging film containing EVOH and PA

◆ Stationery film, single-direction stretch film

◆ Sannitary articles film, embossing film

◆ Fresh-keeping film and stretch film, etc.

Product Numbers:SC/CPP-4200mm

Product description:3-layer co-extrusion cast film line

INTRODUCTION
Much better extrusion plastify system:
The independently researched and invented extrusion plastify system , with much better plastify effects , ensures customers the improvement of the product quality with the decrease of the energies.

Delicate non-stop filtration system:
Speedy non-stop filtration devices with super-large filtration areas and turntable-style constant pressure non-stop filtration devices improve the finished product ratio.

Speedy precise cooling forming system:
All of those ,thin roller wall large flux, intercrossed double flow channel, speedy cooling forming roller with big diameter, precise automatic temperature control supply water system, ensure the improvement of the productivities and the stability of quality.

Olecranon-shaped air-knife adjustable to move up and down, with special configurable cooling soft bellows and rotatedly adjustable cleaning roller, fully satisfies the technical requirement for various products.

Fully automatic double station winding system:
Turntable-type double station winding station can fastly switch over the wind roller automatically, and the exquisite pneumatic auto-locked setup provides precise and stable winding tension and ensures high quality film winding at the fast production speed.

Humanistic operation control system:
The independently researched and invented numeric bus-mastering system simplifies the operation procedure and equips with the first-class electronic controlled components, the whole production line running being stable and precise, with the explicit and simple operation.

Product Numbers:SC/EVA-3500mm

Product description:Solar battery encapsulation film line

INTRODUCTION
SIMCHENG has also designed EVA film line whose applications are:

Security flat interlayer glass, arc interlayer glass, arts and crafts interlayer glass, bulletproof glass, discoloration interlayer glass, Intelligent conductive glass and other special deep processing glass like solar battery.

The basic characteristics of EVA encapsulation film line

1. Additive,mixture of materials and dosing feeder.

2. Prevention from pre-heating Crosslinking reaction of peroxide.

3. The solution to the problems of adhering roll during the period of forming.

4. To ensure the complete forming and stable performance of the transition unit.

5. The recycling and utilization of the of the edge trim.

6. Uniform of winding films, at the same time toensure the appropriate tightness.

7. Closed loop control,PLC man-machine interface operation.

8. Efficient flowing distribution and temperature control stableness of the Die.

Product Numbers:SC/PVB-3500mm

Product description:PVB glass interlayer film line

INTRODUCTION
The PVB glass interlayer film line with its own intellective property rights of Guangdong SIMCHENG plastics machinery Co., Ltd has won the high appraisement by concerned national science institute and the customers for the good features of high quality, good product efficiency, high output and energy-saving since it was provided as the first one in China by SIMCHENG.

1. The special design of screw flowing channel ensures the equal distribution of raw material to make it suitable for the production of new material, recycling material and mixed material also.

2. Full-automatic water-cooling system can control the temperature effectively to ensure the high quality of the products.

3. Adopt the way of intellectualized gauging together with auto pressure adjustment during fore-and-aft gauging to keep the equal distribution of raw material, then make the product quality improved greatly and also energy-saving.

4. The unique design of die lip makes the product quality more stable and reliable.

Product Numbers:SC/CPE-3000mm

Product description:High-speed stretch film line

INTRODUCTION
◆ Line speed:500m/min

◆ Film thickness:0.01～0.04mm

◆ High-precision digital control system.

◆ Exact on-line cutting.

◆ Full-automatic and high-speed roller-changing,1second only and having no free web.

◆ Full-automatic locating film-unloading system, and auto paper core loading.

Product Numbers:SC/PP-3500mm

Product description:PP environment-protection grained film line

INTRODUCTION
The design feature of this production line

1、High speed production,which has been set from 25m/min to 250m/min,the output being over 800kg/h.

2、High efficiency plastified,melted with single and twin screw co-extrusion design,high speed slitting, melting and plastifying,high efficiency plastifying screw,which can use directly high fill-in calcium carbonate powder and inorganic pigments to decrease the cost of expensive raw materials for customers.

3、High flexibility raw material and product transition design,this production line not only can produce PP environment protection grained film,but also can produce some other production.through fast flexible transition to increase the breed of the product for the customers.

4、Product diversification,this kind of film line can produce not only perfect PP grained film, but also CPP film , PP stationery film and PP stationery sheet.

Product Numbers:SC-4850mm

Product description:Chill roller

INTRODUCTION
Thin-walled heat exchange chill roll box with huge capacity, wide diameter and high efficiency.

width: 1000mm-4850mm

Product Numbers:SC

Product description:Screen Changer

INTRODUCTION
Application of Columnar double-station screen changer and flat-plate screen changer.

Screen changers are used to eliminate the solid infectants and impurity in polyester melt，which will not affect the production. It’s most suitable for the widely-used extrusioned production of thermoplasticity resin which can be applied from advanced multi-layer film extrusion to complcatied recycle production.

Advantages of Columnar double-station screen changer:

1. Free of sealing.

2. Manual and automatic control.

3. Optimized flowing channel.

4. Work safely.

5. Precise filtering and repeatable.

6. Increase the output,decrease the stoping production and waste.

7. Decrease maintanin requirement.

8. Venting air.

Advantages of flat-plate screen changer:

1. Use pressure to drive the sealing.

2. No leakage.

3. Operate safety.

Product Numbers:SC

Product description:Flexible calendering

INTRODUCTION
Techniche of flexible calendering

The film tolerance is adjusted according to the gap of die lips as cast techniche but not depends on the surfaces of two rigid rolllers, which makes the film appearance quality can compare with that of cast technology. The heat melt extruded by plastifying is between roller and flexible belt which convery good surface photics performace to both sides of the film.

The most outstanding advantage of flexible calendering is: Both sides of the film getsufficient cooling in the gap of calender of the second cooling zone, then make the film has good photics and dynam performances. So such things like high degree stretch, high heat shrinkage will not happen, to ensure the film uniform and eliminate the sheet curve.

Product advantages of flexible calendering:

On aspect of photics performace, flexible calendering could compare with three-roller calendering and is better than that of cast. On aspect of physical performance, It’s better than the other two. That’s because the cooling of extruding melt of heat plastics is faster and more uniform which makes it more suitable for latter heat mouding procedure. It inherits the adavatages of cast technique on aspect of apearance. All these imporve thefilm apperance quality and eveness a lot. It’s a new technique to improve thefilm quality and more suitable for high quality film production.

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Cast Film Line
CPP Film Line   CPE Film Line   Stretch Film Line   Glass Interlayer Film Line   Solar Battery Encapsulation Film Line

BOPP Film Line

Key Spares

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Add:
A District, Shishan Industrial zone, Nanhai, Foshan, 528225 China.

Tel:
+86757 8120 7008
+86757 8120 7003

Fax:
+86757 8120 7001

Website:
http://www.s-c.cn/en/

E-Mail
s-c@s-c.cn
 

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Guangdong Simcheng Plastics Machinery Co., ltd is an equipment manufacturing enterprise integrated Science and Technology Industry Trade, three main industries including: New Energy ,Automatic and Safety Glass for Building, Soft Package for food, the main production including: Solar Battery Encapsulation Film Lines, Automatic Glass Interlayer Film Lines, Multilayer Co-extrusion Film Lines.

From 2003 till now，the multilayer co-extrusion cast film line manufactured by our company had taken place of imported ones, with domestic market share for more than 80%, taking the first place of Sales Volume for consecutive eight years. And our company has been also awarded the title of “the Processing Base for High-End Wide Cast Film Line in china by China Plastics Processing Industry Association.

Solar battery encapsulation film line selected as the modern Top 500 project in Guangdong Province in 2010 has become the only one new energy equipment realizing industrialization, as a support unit of which in 2011, our company has established engineering technology research and development center for the Solar battery encapsulation film line in Guangdong Province.

The automatic glass interlayer film line as the High New Technology Product in Guangdong Province currently has shared the domestic market in the first place, whose films have partially used for high-end cars.

Simcheng is the national standard leading company of Chinese plastic film machinery, Mr.Zhang Chunhua, general manager of the company as a Team Leader. Simcheng is the one with most volume of independent patents as many as 45 including 5 invention patents in the domestic industry, which has been granted as the Priority Supporting Enterprise by Ministry of National Commerce, and the Credit Rating of AAA Grade, meanwhile, being the High-New Technology Enterprises, Private-owned Technology Enterprises in Guangdong Province, Samples Enterprise of Responsible Employers in Guangdong Province, Nanhai District Eagle Plan enterprise.

If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ hello@helloglass.com ] , and you will get the answers of what you need in 24 hours. To learn more, please go to www.HelloGlass.com .

======================================
GLASS MANUFACTURER MAIN PRODUCT                                   
======================================

 Insulating glass units shall consist of two or more lites of glass separated by a desiccant filled roll-formed aluminum or steel edge spacer with 4 bent corners and zinc plated steel straight key joint to provide a hermetically sealed and dehydrated space. The spacer contains a desiccant – molecular sieve which eliminates moisture in the cavity. Insulating glass shall be dual seal with a primary seal of black (or gray) polyisobutylene (pib) and a secondary seal of black (or gray) silicone or polysulfide. The combination of two panels of glass and trapped air is what makes an Insulating glass a superior energy efficient method of glazing. The whole unit is hermetically assembled by a double barrier sealant.

An Insulating glass with a Low-E coating effectively enhances performance. The heat insulation effect could be further improved if Argon or other special gases are filled in the cavity.

Features for insulating glass：

1、Energy Saving

2、Sound Insulation

3、Water Condensation Prevention

Specifications of insulating glass：

Maximum Size: 2400×3660mm (96”×144”)

Minimum Size: 180×300mm (7”×12”)

Spacer Width: 6mm(1/4”), 9mm(3/8”), 12mm(1/2”), 16mm(5/8”), 20mm(3/4”)

Certification & Complied standards:

China CCC Safety Insulated Glass Certificate (GB/T 11944) 

Chinese Standard GB/T 11944 Insulated Glass

Packing :

By strong sea-worthy wooden crates

Products Overview
     Low-E coated glass is a 2.5-25μm wavelength range of infrared radiation COSCO high reflectivity coating glass, the products have a high visible light transmission rate, at the same time infra-red has a strong role in blocking, it has good insulation properties, in the summer to prevent too much sunlight can enter the room, the indoor winter heat spillover block to meet the energy requirements.
LOW-E glass is an effective energy-saving principle of the radiation so that the rate of glass E value from 0.84 down to 0.25 below. Glass There are three ways of heat transfer; radiation, convection, conduction (as shown). The strength of the absorptive capacity of the glass is directly related to the glass on the far-infrared heat blocking effect. Low-emissivity glass is not easy to absorb the thermal radiation energy from outside, so the glass through conduction, radiation, heat transfer by convection less, Low-E glass is the limit of this part of the heat transfer. The floor of our living room temperature in the winter due to high temperature than the outdoor, LOW-E glass can prevent the indoor to the outdoor heat radiation, and to prevent the spread of heat loss; and outdoor temperature in summer is higher than room temperature, and the summer of LOW-E glass can be Outdoor radiant energy to prevent access to the indoor, so no matter summer LOW-E can play the role of a good thermal insulation with excellent energy saving effect.
Low-E glass production process by way of two off-line Low-E glass and on-line Low-E glass in two.
Off-line Low-E glass features:
① U value of low, significant energy-saving effect.
② wide spectrum of choice, rich colors.
③ multi-product, multi-portfolio changes.
④ better get to meet the design requirements of designers.
Online Low-E glass features:
① chemical properties of stability, not oxidation, can be a single use, long-term storage.
② thermal processing performance is stable, flat steel can be directly carried out, and bend steel, and laminated so on.
③ solid film, good resistance to abrasion.
④ synthetic insulating glass, the edge does not need in addition to film.
Color: net color, light gray, light blue, light green,a variety of colors, etc.
 

Electrochromic Glass /Switchable Glass

(Also called: Electric-control Curtain Glass / Smart glass/Liquid Crystal Glass)

Smart glass or switchable glass,also called smart windows or switchable windows in its application to windows or skylights,refers to electrically switchable glass or glazing which changes light transmission properties when voltage is applied.

Certain types of smart glass can allow users to control the amount of light and heat passing through:with the press of a button,it changes from transparent to translucent,partially blocking light while maintaining a clear view of what lies behind the window.Another type of smart glass can provide privacy at the turn of a switch.

The use of smart glass can save costs for heating ,air-conditioning and lighting and avoid the cost of installing and maintaining motorized light screens or blinds or curtains.When opaque,liquid crystal or electrochromic smart glass blocks most UV,thereby reducing fabric fading;for SPD-type smart glass,this is achieved when used in conjunction with low-e low emissivity coatings.

Critical aspects of smart glass include installation costs,the use of electricity,durability,as well as functional features such as the speed of control,possibilities for dimming,and the degree of transparency of the glass.

Basic Information

Glass Type (Laminated Glass):

Annealed, tempered ,curved…etc. (laminated with various of Glass )

Glass Color:

Clear, bronze, gray, green tint etc. (laminated with various of Glass )

Dimension:

Up to 47.24” x 118.11” (1200mm x 3000mm)

Thickness:

8mm (3mm+3mm) to 22mm (10mm+10mm)

Shape:

Any shape, including holes anywhere

Electrical Parts

Electrical:

Driving voltage: 75volts A.C.

Current :less than 20 mA/ft2

Power :approx. 1 watt/ft2

Power Supply:

110V or 220V (use the general electrical outlet )

Others

Environment:

Storage:-20oC to 70oC (-4oF to 158oF)

Operation: -10oC to 60oC (14oF to 140oF)

Switch Time:

Approx. 100 milliseconds at room temperature

Optical:

Transmission: 76%

View angle: approx. 140o

Life:

Greater than 10 years

Laminated Glass

Introduction

Laminated glass is a combination of two or more glass sheets with one or more interlayers of plastic (PVB) or resin. In case of breakage, the interlayer holds the fragments together and continues to provide resistance to the passage of persons or objects. This glass is particularly suitable where it is important to ensure the resistance of the whole sheet after breakage such as: shop-fronts, balconies, stair-railings, roof glazing.

Product Characteristics

1. Excellent safety to human body, anti-bumping and shocking, high resistance to piercing.

2. Good soundproof and heat isolation effect.

3. Strong UV resistance.

4. Diversified colors.

5. Durable and fadeless.

Product Specifications

Maximum size: 3660mmx2440mm

Minimum size: 300mmx300mm

Number of layers: 1-4

PVB color: Clear, milky, gray, blue, green, pink and bronze, etc.

PVB thickness: 0.38mm , 0.76mm and 1.52mm or above.

Packing

By strong sea-worthy wooden crates.

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Tempered glass

Laminated Glass

Wire glass

 Painted glass

Perspective Glass

Hollow glass

Coated glass

Ultra-white Glass

Frosted glass

Low-e Glass

Colored glass

Glass curtain wull

Smart glass

Armored glass

Mirror Series

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
 Welcome to
Nanjing Xinfurui Glass Industries Co.,Ltd.  

 Address： No. 88-3 Shuangqi Road,Jiangning District,Nanjing

 P.C： 211164
Mobile： 13770987779 13952019977
Tel： 025-51193415、51193223、86131099
Fax： 025-51193223
E-mail： 474229173@qq.com
Website： http://www.xfrglass.com
 

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
NANJING XINFURUI GLASS INDUSTRIES CO., LTD. It is a research and development, production, sales and service in a modern high-tech glass processing company, is producing Tempered glass, laminated glass, Hollow glass various industries such as glass, intelligence, electronic control dimming glass series, Perspective Glass, F79B-25-XFR 1 type Armored glass, light glass professional manufacturer of special glass, with modern production lines, first-class equipment and technical staff, managers, high-quality staff. Five professional processing workshop, Tempered glass workshop, laminated glass workshop, dimming glass workshop, Armored glass workshop, Perspective Glass Workshop. Company production base in Nanjing, the business covers national and international markets.

Quality Management System：
Passed the ISO 9001 quality system certification, the mandatory building safety glass “3C” certification. Dimming glass by GB18045-2000/GB9656-2003 Railway vehicle / vehicle testing national standards of safety glass.

The project has been completed:
1、World Expo 2010 Shanghai Jiangsu Museum, the World Meteorological Museum, Museum of Pakistan, China Telecom Building, 6F Experience Museum
2、FAW-Volkswagen car show (Pudong Airport and Beijing Airport, Tianjin Airport, Shenyang Airport 11 Airport)
3、10 floor office building and Shanghai Banking Corporation office lobby
4、Business Hotel Hangzhou International Conference Center.
5、Boeing Beijing Office
6、The national command center Kunlun Gas
7、Kazakhstan (Auto Windshield) the United States. Singapore. Laos
8、Nanjing Greenland Financial Center (Jiangsu undertaking of a high) built-in glass

If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ hello@helloglass.com ] , and you will get the answers of what you need in 24 hours. To learn more, please go to www.HelloGlass.com .

======================================
GLASS MANUFACTURER MAIN PRODUCT                                 
======================================

SZ-SD2225  Glass straight-line double edging machine is suitable for grinding two parallel straight-line edge of flat glass, rough, fine and polishing at one time, its feature of high precision, efficiency and secure .the lathe bed use the double straight-line guide rail and ball-bearings, the drive is smooth and reliable. The product adopts the PLC control, speed control by transducer. Set parameter via the intelligent interface. Finish to work at one time, the operation is easy and convenient.

SZ-SD2215/25/30/40 available in different models (from 1500mm to 4000mm width), each of which is equipped with 22 spindles (11spindles per side with safety corner cutting)

SZ-ZB4 is equipped with 4 spindles, which is well working for edging and 45 degrees arrising on various size and thickness of glass sheets. The Rough grinding, fine grinding and arrising could be finished at one time. The same thickness of sheet glass could be continuously processing, so that allow to have a bulk production for the pre-processing before tempered, insulating, laminating and other further processing.

SZ-W26 glass washer & drier adopt horizontal structure, the flat glass placed on the conveyor roller, passing in-feed section, washing section, drier section, and out-feed section. Glass washing and drying machine is used for cleaning and air-drying of flat glass panes. There are various types available for different glass, float, coating and low-E glass. Washing and drying sections can be elevated or lowered as a whole with PLC. Only in this way will come off satisfactorily.

SZ-XB251 is designed for beveling and side edging of glass sheet with various size and thickness. The rough grinding, fine grinding as long as polishing are able to finished at one time, the processing speed is adjusted by variator which offers a wide range of speed selection; input and output conveyors adopt timing belt which can improve the stability of transmission; PLC and digital display are available for optional.

SZ-ZK130 Glass drilling machine is a cold processing machine which is easy to drill holes on sheets of glass and is equipped with upper and lower drilling bit. An automatic cylinder drives the lower-drill bit while the upper bit is operated by manual. Holes of different sizes can be achieved with bits of differentdiameters. this machine works efficiently, it has low glass damage and is easy to operate.

SZ-YB1 inter &external shape edging machine applies to grind and polish for shaping peripheral edge of circular ,  ellipse and irregular flat glass ,  and also applies to semi-automatic  grinding for circular and  elliptical glass  .  Using different shaping grinding wheels can obtain the half- round, flat or OG edges of glass.

It is equipped with three automatic sandblasting guns, which controlled by programers, and also one more gun for manually, so that be available for both bulk production and single peice processing.

SZ-DJB9 is able to grind and polish the miter angle on glass, with side edging & polishing and rear seaming, all above process can be worked on same time. The control system applied with Mitsubishi PLC control unit. Input and output conveyor adopt timing belt which can improve the transmission precision. The processed glass surface is very bright and smooth, approaching the original glass surface.

SZ-BG1015 is covenient to operate and specalized in grinding arris of flat glass before tempered, laminated and other further processing

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Double Edging Machine

Straight Edging Machine

Straight Beveling Machine

Miter Edging Machine

Shaped Edger & Beveller

Drilling Machine

Washing Machine

Sandblasting Machines

Sand Belts Grinding Machine

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Tel:+86 10 89447422
Fax:+86 10 89443531 Mob:+86 13683680261
info@sagertec.com sagerglass@sagerglass.com
MSN: richardisflying@hotmail.comwww.sagertec.comwww.sagerglass.com

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Sager Tec. is a professional designer and manufacturer for machinery, which specialized in glass industry. At initially, Sager was dedicating to design and produce glass laminating equipment, as long as providing solution for laminating glass processing. The products have been sold to USA , Europe, Australia , South America etc., where more than dozens of countries in past few years, With a fast growing and developing, Sager was starting up the project for new glass processing machines in 2007, by optimized cooperation and source integration, we are ready and confident to provide you qualified machines basis on 10 million fixed capitals, 35 technicians and 396 employees. Now, the products range is increased, to which including competed PVBLaminating production line, EVA laminating furnace,
and materials, all the type of grinding machines, as long as washing machines and other glass processing equipment. Our business philosophy is “ source integration, technology renovation, ensures quality and service clients” we promise only to what we can achieve. Beijing provide qualified and advanced products for our clients in glass industry is our mission

If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ hello@helloglass.com ] , and you will get the answers of what you need in 24 hours. To learn more, please go to www.HelloGlass.com .

======================================
GLASS MANUFACTURER MAIN PRODUCT                                 
======================================

HYSHWFK4-1800X300

Mainly used for colored PVC and coating profiles’ four corner seamlessly welding, with smooth upper and lower surface.
Composed four heads, fixed column, movable column, frame, linear guide, pneumatic system, auto output, pushing section, CNC/Program parts.
By adjusting the limit bolt of the movable sliding base, it can accomplish normal welding with welding seam adjustable, by adding welding plate, it can accomplish multilayer welding. High performance pneumatic parts, linear guide system with the characteristic of easy maintenance and long using life.
Easy operation control system with friendly used surface, and stable CNC System.
Module design for the heads, with high rigidity and strength, which enables more stable for the machine.
Adopts advanced parallel welding technologies and special synchronous structure.

CNC Double Precision Mitre Saw–HYLSJK05-500X4500

Features:

•Used for PVC profiles cutting, automatic 45 ~90 degree cutting angle, one time cutting several pieces of profiles.
•Machine guide and head feeding adopted liner bearing system, Alu-profiles cuttable by change the cutting saw.
•Install cutting angle device ( between 45 and 90 degree) according to the customer demand.
Technical Parameters:

•Power supply:                    380V/50Hz

•Air pressure:                      0.5~0.8(Mpa)

•Input Power:                       5.9kw

•Air consumption:                150L/min

•Angle:                                   45 , 90

•Cutting Height:                  120mm

•Cutting Width:                    320mm

•Cutting Length:                  460~4500(mm)

•Saw Blade diameter:        500mm

•Overall dimensions:         5850x1400x1600(mm)

•Weight:                                1500kg

Four-Head Welding Machine(Seamless)–HYSWFH4-180X3000

Features:

•Used for colored PVC window welding. The corners of welded windows have no seam.
•Processes all kinds of colored profile, welds without seams, cleans top, bottom and outer welding tumors at one time. Smooth and clean welded seam.
•Simultaneous press welding techonlogy with high welding intensity.
•Processes single or double layers welding with cutters and fixtures.
•Special,  reasonable and stable structure for the whole machine with reliable operation.

HYDM-01-80 End Router(A)

Features:

•Used for PVC profile end milling.
•Used for special-shaped screw-connected transom profile end milling.
•Pneumatic clamping and manual feeding,capable of end milling different profoles with different sections by changing to different cutters.
Technical Parameters

•Power supply                                  380V/50Hz

•Air pressure                                    0.4-0.6(MPa)

•Air consumption                             30L/Min

•Input power                                      0.8Kw

•Routing cutting diameter                Ф160mm

•Weight                                              150Kg

•Overall dimensions                         700X580X1540(mm)

Welding Machine (Seamless)

Features:

•Used for colored PVC window welding. The corners of welded windows have no seam.
•Produces all kinds of colored profile,welds without seams.cleans top,bottom and outer welding tumors at one time,smooth and clean welded seam.
•Simultaneous press welding technology with high welding intensity.
•Produces single or double layers welding with cutters and fixtures.
•Special,reasonable and stable structure for the whole machine with reliable operation.
•PLC control system,high quality electrical parts with reliable and convenient performance.
Technical Parameters：

•Power supply                                        220V/60Hz

•Air pressure                                          0.5-0.8Mpa

•Air consumption                                   100L/Min

•Input power                                            2.4kW

•Environment temperature                    20~40(℃)

•Min. welding length                               350mm

•Max. welding length                              3000mm

•Max. welding height                             180mm

•Max. welding width                               120mm

•Overall dimensions                               4100×1500×800 (mm)

HYSLJ-120 Vertical Cutting Center

Features:

•Used for ±45°and 90°cutting of plastic profiles . 
•Composed of cutting section, feeding section, clamping section, auto unloading section and so on.
•Completes cutting process automatically.
•Cutting without waste, greatly saves profiles.Technical parameters:
•Power supply                                     380V/60Hz

•Air pressure                                       0.4-0.7(Mpa)

•Air consumption                                200L/Min

•Input power                                         5.25Kw

•Feeding speed                                  Vmax=70m/Min

•Max cutting height                             120mm

•Max cutting width                               120mm

•Saw blade diameter                          Ф450mm

•Overall dimensions (with feeder)     1000x1420x2000mm(LxWxH) 

HYSF-200 Double Axis Copying Router

Features:

•Used for routing holes and slots in horizontal and vertical diretions.
•Pneumatic clamping,  high speed milling and automatic cooling.
Technical Parameters:

•Power supply                                     380V/50Hz

•Air pressure                                       0.4~0.6(Mpa)

•Air consumption                                30L/Min

•Total power                                       1.85kw

•Copy  range:                        Vertical    90X290(mm)

                                                  Horizontal                                  300X100(mm)

•Weight                                                250Kg

•Overall dimensions                          1000X1150X1500(mm)

HYSC-01 Lock Hole Slot Process Machine

Features:

•Used for milling holes for handle installation.
•Composed of three-hole drillers and copy router, pneumatic clamping and atomatic cooling .
•One-pass clamping, can complete two processes and achieve drilling three holes in the horizontal direction and replicate routing in the vertical direction.
Technical Parameters:

•Power supply                       380V/50Hz

•Air pressure                         0.4~0.6(Mpa)

•Air consumption                   30L/Min

•Input power                           1.85Kw

•Weight                                   300kg

•Overall dimensions              1000X1300X1500(mm)  

HYVQ-120 V Notch Cleaning Machine

Features:

•Used for cleaning V-shape welded seam or welded seam of cross transom.
•Pneumatic clamping, complete one-pass V-shape welded seam cleaning or cross transom cleaning on two surfaces.
Technical Parameters:

•Power Supply:                                 380V/50HZ

•Air pressure:                                    0.4~0.6(Mpa)

•Air consumption:                             150L/min

•Process height:                               120mm

•Process width:                                 120mm

•Cleaning seam length:                   10mm

•Overall dimensions:                        860x670x1250(mm)

•Weight:                                               300KG

HYDX-01 Multi-function Single Head Router

Features:

•Used for  alu-pvc door-window slot and hole milling. 
•Complete one-pass routing of two drain slots and pneumatic balance slots of various profiles.
•Process various pulley slots, lock hole slot, hardware component slots and others with hole duplicating function.     
•PLC control, complete routing drain slots in two different directions through one-pass clamping.  Efficiency is two times as much as double-axis drain slot router.     
•Upper milling machine head adjusts freely at 0°~45° to route drain slots at various angles.
Technical Parameters:

•Power supply                          220V/50Hz

•Air pressure                            0.4~0.8(Mpa)

•Air consumption                      50L/Min

•Input power                             1.2kw

•Slot depth                                40mm

•Slot depth                                4~5(mm) 

•Slot length                               10~50(mm)

•Weight                                      500Kg

•Overall dimensions               900x900x1860(mm)

HYDX-02 Multi-function Double Head Router

Features:

•Used for  PVC door-window slot and hole milling. 
•Complete one-pass the routing of four drain slots and other slots on various profiles.
•Processes  various pulley slots, lock hole slots, hardware component slots and others with slot and hole duplicating function .
•PLC control, completing  routing of drain slots in two different directions through one-pass clamping.  Efficiency is four or five times as much as double axis drain slot router.
•Upper milling head adjusts freely from 0°~45° to accomodate drain slot routing at  various angles.     
Technical parameters:

•Power supply                     220V/50Hz

•Air pressure                       0.4~0.6Mpa

•Air consumption                50L/Min

•Input power                        2Kw

•Slot depth                          40mm

•Slot width                           4-5mm 

•Slot length                          10-50(mm)

•Weight                                1000Kg

•Overall dimension             800X4000X1800(mm) 

HYSH(2+2)-130-3500 Horizontal Double-four-head Welding Machine

Features:

•Used for  PVC door-window  welding.
•Welding four corners at one time, single and double transom, cross trasom and special angles. Possess all fuctions of four, three-, two-, one-head welding machines. Four heads can work simultaneously, indvidually or in combination.
•PLC control, pneumatic drive with high reliability.
•Semi-automaic window unloading system, simple operation with low labor intensity.
Technical Parameters:

•Power supply                                  220V/50Hz

•Air pressure                                    0.4~0.6Mpa

•Air consumption                             300L/Min

•Input power                                      6.2Kw

•Welding range(one-pass)             400×750(mm)   3000×3500(mm)

•Welding range(not one-pass)        400~4500(mm)

•Welding height                                20~130(mm) 

•Welding width                                 120mm

•Weight                                              4000Kg

•Overall dimensions                         4500x4000x1800(mm)

HYSH(3+3)-130-3500 Horizontal Double-six-head Welding Machine

Features:

•Used for PVC door-window welding .
•Welding six corners at one time, single and double tansom, cross transom and special angles. Processes all funcions of four-, three-, two-, one-head welding machines. Six heads can work simultaneously, individually or in combination.
•PLC control, pneumatic drive with high reliability.
•Semi-automatic window unloading system, simple operation with low labor intensity.
Technical parameters: 

◦Power supply                                           220V/50Hz

◦Air pressure                                             0.4~0.6Mpa

◦Air consumption                                       300L/Min

◦Input power                                               6.2Kw

◦Welding range(one pass)                      400×750(mm) 3000×3500(mm)

◦Welding range(not one pass)                400~3500(mm)

◦Welding height                                         20~130 (mm)

◦Welding width                                          120 (mm) 

◦Weight                                                       4000Kg 

◦Overall dimensions                                 4500x4000x1800 (mm)

HYSH2-130-3500 Two-head Welding Machine

Features:

•Used for  PVC door-window welding.
•Welding two-point, one point, transom, cross-transom and special angles. Two heads can work simultaneously, individually or in combination.
•Protection guards. •PLC control, pneumatic drive with high reliability. Technical parameters:
•Power supply                     220V/50Hz

•Air pressure                       0.4~0.6(Mpa)

•Air consumption                100L/Min

•Input power                         2.2Kw

•Welding range                   400~3500(mm)

•Welding height                  20~130(mm)

•Welding width                   120mm

•Weight                               1600Kg

•Overall dimensions           4000x1800x850(mm)

HYSH3-130-3500 Three-head Welding Machine

Features:

•Welding three-point, two or one corner, transom,cross transom and special angles. Three heads can work simultaneously, individually or in combintion.
•PLC control, pneumatic drive with high reliability.

Technical Parameters:

•Power supply                    220V/50Hz

•Air pressure                      0.4~0.6(Mpa)

•Air consumption               150L/Min

•Input power                        3.3Kw

•Welding range                  400~3500(mm)

•Welding height                  20~130(mm)

•Welding width                   120(mm)

HYSH4-130-3500 Four-head Welding Machine

Features:

•Used for PVC door-window  welding.
•Welding four three two or one corner ,transom, cross-transom and special angles.Four heads can work simultaneously, individually or in combination.
•PLC control, pneumatic drive with high reliability.
Technical Parameters

•Power supply                         220V/50Hz

•Air pressure                           0.4~0.6(Mpa)

•Air consumption                    200L/Min

•Input power                            4.4Kw

•Welding range                       400~4500(mm)

•Welding height                       20~130(mm)

•Welding width                        120mm

•Weight                                    2200Kg

•Overall dimensions               5000x1800x850(mm)

HYSH4T-130-4500/HYSH4T-200-4500 Four-head Welding Machine

Features:

•Uesd for PVC door-window welding.
•Welding four, three, two or one corner, transom, cross transom and special angles. Four heads can work simultaneously, individually or in combination.
•Protection guards.
•PLC control, pneumatic drive with high reliability.
Technical Parameters:

•Power supply                      220V/50Hz

•Air pressure                        0.4-0.6(MPa)

•Air consumption                  200L/Min

•Input power                          4.4kW

•Welding range                    400-4500(mm)

•Welding height                    20-200(mm)

•Welding width                     120mm

•Weight                                  2200Kg

•Overall dimensions             5000x1800x850(mm)

HYSHKG4-1800×3000 Horizontal Four-point Welding Machine

Features:

•Mainly used for multiplayer welding
•The two upper clamps prevent the finished window from misplacing when multiplayer welding.
•The pneumatic component and linear pairing element feature high precision, easy maintenance and long performance life.
•Easy operation control components, friendly visual interface and stable CNC system.
•This machine adopts modularized desigh, whose rigidity and intensity have a great improvement. So function of the whole machine becomes more stable.
•The machine adopts advanced parallel welding and unique synchronous structure.
•The machine feature large welding scope, high angle intensity, high precision finished window and high auto.
Technical Parameters:

•Power supply                                       220V/50Hz

•Air pressure                                          0.5-0.8Mpa

•Air consumption                                   200L/Min

•Input power                                           11kW

•Welding height                                      25~260 (mm)

•Welding width                                        0~150(mm)

•Welding range(LxW)                            600×400(mm)~3000×1800(mm)

•Welding space range                           0~3 (mm)

•Overall dimensions                               4600×3500×1500 (mm)

•Weight                                                   2000kg

HYLJKS02-120 CNC Vertical Cutting Centre

Features:
•High precision: three fixed saw blades.No adjustment needed for 45°and 90°cuts and no adjustment error; no dry running for saw blades. Air -liquid conventor driven  device avoids crawling of air cylinder drive and assures stable running.•High efficiency : Computer controlled system sets process requests. Servo system drives automatic feeding, cutting and unloading. Vertical and reciprocating cutting has no dry cutting and its efficiency  is two times greater than that of double mitre saw.•High security : Fully closed structure for safe and stable operation.•High profile saving ratio :Computer optimized process syestem.•Special mechanical device can achieve the best optimum cutting, have two stub bar cutting, and save 20%-30% profiles compared with double mitre saw. Automatic loading and unloading system can save0%-70% manual work compared with double mitre saw.•Servo motor, spindle drive motor and main electrical parts adapt to Japanese,Geman and  Italian brands.
Technical Parameters:

•Power supply                                     380V/50Hz

•Air pressure                                       0.4-0.8(Mpa)

•Air consumption                                200L/Min

•Input power                                         5.25Kw

•Feeding speed                                  Vmax=70m/Min

•Max cutting height                             120mm

•Max cutting width                               120mm

•Saw blade diameter                          Ф450mm

•Overall dimensions (with feeder)      1000x1420x2000mm(LxWxH) 

HYSHQX4-2000 CNC Welding and Corner-cleaning Producing line

Features:

•HYSHQX4-2000 Automatic welding and corner-cleaning production line is made up of one CNC multi-layer four point welding machine, automatic feeding device I, Auotmatic supporting device, automatice feeding device II, two CNC double-head cleaning machines, auxiliary manipulator and stock stop device.
•This line can achieve automatic welding, cleaning and feeding of rectangle windows in enormous quantities.
•This line adopts import CNC drive system, which features easy operation, friendly inferface, stable system, energy-efficient and high degree of automation.
•The welding machine can weld two or four layers PVC profiles, large welding scope and high working efficiency.
•Excellent technology of the welding machine fully ensures the high intensity angles and consistency of finished windows when multilayer welding.
•Modularity design of welding heads ensures the high structure intensity, rigidity and stable function.
•The welding heads are equipped with two upper clamps in order to avoid upper and lower surface misplace and ensure the high planeness of the finished windows.
•The profile fixtures can satisfy the locating weld of different profile.
•Automatic drawing mechanism.
•Two CNC double head cleaning machines achieve four corners omni-directional cleaning. Servo motor drive brings about high speed cleaning.
•Each cleaning head is equipped with eight tools, which can fully satisfy multi-level cleaning requirement over one hundred kinds of profile.
•Auxiliary manipulator finishes the movement from welding to cleaning.
•The total line is horizontal disposition, which features excellent design, consistent process.

Technical parameters:

•Power supply                                            380V/50HZ

•Input power                                               17.2kw

•Rotating speed                                        3000~12000(r/min)

•Air Pressure                                              0.5~0.8MPA

•Max.welding height                                  320    

•Max.welding width                                    120mm

•Welding range                                          400x400mm       1800X3000mm

•Cleaning height                                        20~120mm

HYLSJ03-450×5000 Double Mitre Saw

Features:

•Automatic 45-90°cutting angle change
•One time four pieces of profiles cutting available (height of the profile should be less than 60mm)
•Machine guide and head feeding adopted linear bearing system
•Automatic machine head brake
•Reasonable structure and high processing precision
•Digital display the profile cutting length and quantity
•With head fine adjusting device
 

Technical Parameter:   

• Power Supply                                     380V 60Hz three-phase，four-wire

•Cutting Motor Power                         3kW (1.5kW×2)

•Cutting Motor Rotational Speed     3300 r/min

•Operation Air Pressure                    0.5～0.8MPa

•Air Consumption                               30L/min

•Max. Cutting Length                          5000mm     

•Min. Cutting Length                          430mm

•Cutting Range                                   230×90mm (width×height)；120×105mm (width×height)

•Cutting Angle                                     45°and 90°

•Cutter Feeding Speed                     0～3 m/min (Stepless speed regulating)

•Saw Blade Specification                φ457×4×φ25.4

•Overall Dimension     &nbsp

======================================
GLASS MANUFACTURER MAIN PRODUCT                                   
======================================

Product’s NO:KRT-003

The original Nikken glass cutter

1.imported cutter head,very good quality,

2.used for different thickness,

3.Size:

D:1-3mm

F:2-4mm

No mark：2-8mm

T:6-12mm

S:15-19mm

Product’s NO:KRT-004

The original Nikken glass cutter

1.imported cutter head,very good quality,

2.used for different thickness,

3.Size:

D:1-3mm

F:2-4mm

No mark：2-8mm

T:6-12mm

S:15-19mm

Product’s NO:KRT-046

Product’s NO:KRT-049

Product’s NO:KRT-059

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Glass cutter

Glass handling tools

Small machine

Wheels

Acessories for glass machine

Glass hardware
======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Contact number

Name:Alex Lee

E-mail:alex.kerui@hotmail.com, teruitool@yahoo.cn

Mob:0086-13925017087

Tel:0086-20-36499996-802

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Guangzhou Terui Glasstool co.,ltd, a professional manufacturer for tools, mainly produces glass deep processing, incision and transportation tools. It is the only glass incision manufacturer in China which takes the lead with producing great thin row LCD and TFT conduct electricity by advanced techniques with Japan Zhuyou hard alloy.
Terui company is composed by lots of professional personnel who are working in glass tools is research and development. We adopt superior material to produce new products with new techniques. So our products take up good position in the international market and we receive a high respect in the industry.

If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ hello@helloglass.com ] , and you will get the answers of what you need in 24 hours. To learn more, please go to www.HelloGlass.com .