======================================
GLASS MANUFACTURER MAIN PRODUCT
======================================
TB3-1200 high-speed three-layer coating machine
Application：
Specialized coating for thermal transfer ribbons
FEATURES：
1、Winding and rewinding with duplex rotary aircraft,automatic cutting.
2、More synchronous motor speed control,closed-lopp system liuduan tension,taper tension rewinding.
3、Japan is Mitsubishi PLC centralized control,human-machine interface operation.
4、Three coating units,can be at once positive and negative sides of coating.Roller coating method for the quantitative coating.
5、Coating unit with separate hot oil heaters and thermal oil circulation system.
6、Oven for the negative pressure design,good insulation.Wind speed at the mouth of the uniform.To active roller guide roller oven,by a separate motor.
7、Were equipped with three automatic correction system to correct the deviation between the expected road film,so that winding neatly.
8、The main parts of the bearing,low friction air cylinder,precision valve,proportional valve,transducer,rotary encoder,etc.are imported.
DFX-81050 HIGH-SPEED COMPUTERIZED PRINT MACHINE
APPLICATION：
The machine is ideal for printing film of BOPP、PET、PE、PVC、NY、paper it prints continuously of multiple colour.
FEATURES：
● The machine set of the advantages of north-south serigrafia,developed made.
● Machine imported PLC for automatic control and protection of the linkage.
● Unwinding,feeding,discharging,winding swing roller used in all four modules and the exchange of vector closed-loop tension control system control system composed of (7 Motor Tension Control System)
● Machine has four sections before and after the two man-machine interface for parameter setting and tension display.
● Touch-screen display running status of the working point,running speed and print length of the.
● Income,Unwind of using an independent frame duplex flip agencies,non-stop automatic cutting grafting material.
● Rolling taper tension control to prevent the phenomenon of flowering Chinese cabbage
● Color Group teeth marks rubber roller arm type,with adjustable upper and lower limit installations to ensure accuracy of the version to shorten the time of the version of.
● Automatic ink circulation,scraping ink devices,double-pole,three position adjustable.
● External independent drying drying system,intelligent temperature control,all-enclosed hot-air oven secondary reuse.
● A separate exhaust emission devices,fully meet the requirementsof environmental protection.
● Each has water-cooling device.
DTB1100 TYPE A COMMA BLADE COATING MACHINE
FEATURES：
●Comma scraper garbage disposal unit,the domestic unipue initiative
●Unwinding,winding use single-station discharge chain auto-feeding
●Multi-motor synchronous drive,Floating roller ension control
●Comma scraper,Precision coating,Coating weight uniformity,Coating capacity will be fing-tuning
●Vacuum oven design,Good insulation,Roller oven to active,Oven exports correction
●Oven exports back to the wet plant
●Non-woven adhesive compound,epuipped with roll-bending device
TB3-861000AUTO MULIT-SIDE COATING MACHINE
APPLICATION：
Special for coating of thermal-transfer printing band.
FEATURES：
●Duplex turret type unwinder and rewinder,pre-drive with pre-tension for non-stop,shaft exchange,It used shaftless air clylinder.
●This machine accepts synchronous driving by several motors with six sections of float-roller tension controlling technology.
●It touch screen man-machine interface operation.Japanese Mitsubinshi PLC linkage and central controlled telecommunication system.
●Both the first-coating and second-coating groups are the model of three-roller ind-pulling type,and the third-coating is the model of four-roller ink-pulling type.Both the ink-pulling rollers are driven by independent motor which can randomly regulates its running speed including the gap between operating rollers with the reticulate roller.
●This machine is epuipped with double-alyer oven,negative pressure design,stainless steel inner tand with good temperature-keeping,waste air hit the national waste-air discharge standard.The guide roll of oven is the main driving function accompanied by independent motor driving with deviation-rectifying device at the exist location.
●The thermal device of the oven is an independent part and the third-coating device is equipped by independent heating device for thermal-conducted oil.
●All guide rolls accept biaxial thimble type with good nimble reaction and the material being operated is not easy to be crimpled.
●All bearings and pneumatic cylinders are imported products
GFA-101000 AUTO HIGH-SPEED DRY LAMINATING MACHINE
APPLICATION：
We combine our national situation and FUJI of Japan import advanced technology to develop the parctical auto High-speed dry lamination machine.It is ideal for two or multilayers dry laminating of various material films such as BOPP、PET、CPP、CPE、Foil and paper etc.
FEATERUES：
●The set is synchronously driven by eleven A Cvector conversion motor,Four part dance roller tension control.
●It touch screen man-machine interface operation.PLC linkage and central controlled telecommunication system.
●Anilox roller glues quantificationally and glue eventing device after coating,glue crrculation system.
●High accruacy back pressure three-roller type laminating device and recycle oil heat device is used in the laminating roller.
●The first feeding for double blade cut.
●The second feeding for pre-heating device, water-cooling device for laminated film.
●The third feeding for trestle type, only put the aluminum foil.
●Duplex turret type unwinder and rewinder，pre-drive with pre-tension for non-stop shaft exchange.It used shaftless air cylinder.
●Five stages independent drying system with constant temperature control,waste gas is up to the standard,the guide roll within the drying tank drivesion synchronous tatation,with independent notor,and synchronsion control.
●Rewinder has pneumatic back roller.
●There is potoelectric error-correction device,in the outlet oven and material rolling-out.
Peumatic element and main air cylinder are importation and Yadeke
DTY60800 TYPE PRINTING PRIESS UNIT TYPE COATING
Application：
Apply sublimation coating photographic print ribbon
FEATURES：
●6-color printing can also be completed and back coating
●Multi-motor synchronous drice,floating roller tension detection and closed loop tension system Yaskawa inverter.
●Mitsubishi PLC with centralized control,centralized operation of human-machine interface rpller+coating group were coated blaed from,frequency motor drice alone.
●Drying box liner of stainless steel,vacuum design.Are active roller guide roller oven,aseparate motor,maintaining the same speed with the host.
●Two correcting device to ensure the quality of the printing of the overlay and uniformity of winding.
●Guide roll top with dual-axus core-type,good flexibility,the substrate is not east to fight wrinkles.
●Critical bearingrs,cylinders are imported
FQ SERIES OF HIGH-SPEED PHOTOELECTRIC AUTOMATIC CORRECTION PRECISION CUTTING MACHINE
FEATURES:
●The machine is horizontal with unwinder and rewinder at the two side for ease of operation,more flesible and even operation.
●The motor is controlled by frequency modulation speed-adjusting motor.
●Equipped with automatic tension control for unwinder
●The photoelectricity edge position controller is a made standard scces sory for the unwinder shaft,high equilibrium.
●Equipped with semi-automatic tension control for rewinder.
●Automcetic meter counting of counter.
●It can be required by the users:
1)The rewinding roller is air differential shaft.
2)The machine’s control system was promoted automatic tension or import
DFQ SERIES FREQUENCY CONTROL CONSTANT TENSION CUTTING FOIL CUTTING MACHINE
FEATURES：
●Horizontal-axis winding
●Main motor frequency control
●Unwinding Tension Control
●Winding through the magnetic clutch by a semi-automatic taper tension control
●Scroll with two income differential drice mode,enabling two income balance the tension reel
MODEL TB1-861300 AUTO MULTI-SIDE COATING MACHINE
FEATURES：
●Three sections of roller coating,high precision,even glue spreading,gear dearance can regulate.
●The machine accepts synchronous dricing by several motor.
●It touch screen man-machine interface operation Japanese,Mitsubishi tension.
●Four parts of automatic tension There ia atmospheric pressure rectify a deviation in exit.
●Aluminum tube of oven is the main driving function accompanied by independent motor dricing.
●Structure use syuchronous link between electrical and gear.The machine accepts aircylinder of import,bearing of import.
======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Coating Machine
Laninating Machine
Rrint Machine
Cutting Machine
======================================
GLASS MANUFACTURER CONTACT INFO
======================================
WUXI DONGNAN PRINTING MACHINE CO.,LTD.
Add：The South Zhuhai Road 6# Science and Technology Field of Enviromental Protection Yixing
P.c：214206
Tel：0086-510-87071118
Home Tel：0086-510-87978712
Fax：0086-510-87071116
M.P.：013921315188
General Manager：Renhong Hu
======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
desiccant factory of nuclear industry hengda inc, xinyang is a manufacturer specializes in military nuclear industrial system, has strong capacity of design, research, development, the desiccant is the product for military products, and achieved the iso9002 international quality system certificate.
desiccant factory of nuclear industry hengda inc, xinyang collects all specialists and professionals in desiccant industry, builds the technological innovation and scientific research team, owns advanced technology and fine produce art, complete quality check means, pay more attention to quality and credit. it is a reliable military factory.
the main products are activated desiccants, silica gel desiccants, allochroic silica gels, silica sals, humidity-predicted cards, bentonite series, fluorite, zeolite powders, and nacrite etc. the qualities of these products are accord to the related national working standards, packaging standard and american military mil standard. the products sell good at home and overseas.
the products are used in machine and electricity, instruments, electron and telecom, camera, leather products, boxes, shoes and caps, textiles, clothes, pharmaceuticals, food, tea leaves and storage of daily commodities, keep away from moisture, keep away from mustiness and keep away from rust in transportation.
If you are looking for any glass products, or need any help of glass(specially glass lamination) in China, just send an email to [ hello@helloglass.com ] , and you will get answer of what you need in 24 hours.
