Safety Glazing Products – Page 7

PET Green Tape for High Temperature Spray of Aluminum Alloy Flour

Pet green tape for high temperature spray of aluminum alloy flour from Zac Lynn-UCOLIN

PET Green Tape for High Temperature Spray of Aluminum Alloy Flour
ZAC LYNN

980mm*66M/roll
600mm*66M/roll
25mm*66M/roll
30mm*66M/roll
40mm*66M/roll
50mm*66M/roll
Thickness: 0.06mm,0.08mm

The green thermal tape is applied to protecting the surface of glass and metal in high-temp paint baking and spray of aluminum alloy flour, and to protecting the surface of PCB panel during electroplating and welding.

The green thermal tape is mainly used in paint spray, paint baking, carton sealing-up, shoes, packing consolidation, building decoration and other industries.

The green thermal tape has been widely used to twining the transformer, motor, coil, capacitor and variable frequency power supplier, so as to provide high-temp insulation.

The green thermal tape is applicable to protecting fingers during PCB printing, SMT tin furnace and wave-soldering.

The green thermal tape provides insulation protection for the high-end electric appliance, and can consolidate the cell’s positive and negative poles.
Applicable to solder mask protection.
Application to bundle up the lithium battery of mobile-phone.

The green thermal tape features in excellent temperature-resistance. After peeling off, no glue is left.
High insulation, high and low temperature resistant, acid and alkali resistant, low electrolysis, excellent mechanical property, friction-resistant, tearing-resistant, strong adhesion.

TESTED ITEM GREEN TAPE
Color Green
Sealant Materials Silicone
Sealant Materials Thickness 0.035±0.005mm
Thickness of Tape Sheet 0.06±0.005mm
Temperature Resistance 180℃ Continuously heating
200 ℃ Discontinuously heating
Tear Strength 120 N/25mm
Adhesive Strength 7.5 N/25mm
Elongation 55%
Volage Resistance 5 KV
Insulation Resistance 1,000,000 MΩ
Insulation Grade F

CNC EVA Film Super Clear External Type for Safety Laminated Glass

eva film for laminated glass

Why switchable film break when laminating with glass and eva interlayer film？ from Eva Glass

Why switchable film break when laminating with glass and eva interlayer film？ from Peter Lin

http://www.booksie.com/other/essay/veriwin/knowledge-of-ethylenevinyl-acetate-eva-interlayer-film-for-laminated-glass

EVA Interlayer Film for Laminated Glass

http://www.linkedin.com/groups/Silicone-Bag-Laminated-Glass-Machine-4661444.S.172774359

http://answers.yahoo.com/question/index?qid=20110405004344AAqgY5d

http://laminatedglasssmartglass.files.wordpress.com/2013/04/0731analyze-bubbles-of-laminated-glasssmart-glasswith-eva-interlayer-film.pdf

http://storify.com/evaglass/eva-interlayer-laminated-glass-replace-pvb-film-la

http://www.chinaglassproducts.com/category/eva-film-knowledge/

http://wiki.answers.com/Q/How_do_you_process_laminated_glass_with_EVA_film

http://www.lulu.com/us/en/shop/zac-fang/knowledge-of-ethylene-vinyl-acetate-eva-interlayer-film-for-laminated-glass/ebook/product-15347789.html

http://www.wiziq.com/tutorial/130092-how-to-make-laminated-glass-with-EVA-interlayer-film

http://www.slideboom.com/presentations/333313/Analyse-Bubbles-of-Laminated-Glass-with-EVA-Film-Interlayer

Analyse Bubbles of Laminated Glass with EVA Film Interlayer

View more presentations or Upload your own.

https://www.facebook.com/ucolinsilicone/posts/287322291385026

Polishing Eding of Heated EVA Film Laminated Glass by Peter Lin

Common problems of EVA FILM(Ethylene-vinyl acetate)

Common problems of EVA FILM(Ethylene-vinyl acetate)
[CNCGLASS EVA film is produced in purified dustless work shop, don’t have these problems.]

Following are some common problems the EVA Film may have if the Manufacturer produce bad quality EVA Film.
-Gluing of EVA,
– Mosquitoes
– Black spots
– Holes on EVA FILM
-for colorful EVA FILM, the color is not even.
– Knocked marks
– Yellowing of EVA and etc. …
Gluing of EVA
Which means the two layer of EVA FILM stick together, three reasons can cause it:
(1) The EVA FILM is ultra-transparent film; they are easy to show adhesives. In this situation, put membranes between the two layers of EVA FILM.
(2) The temperature is too high, like the temperature in the container is too high (maybe over 65 degree), which will lead the EVA FILM to melt, and stick together.
(3) The film is too tight when it was produced, this is factory’s problem, they should loosen the EVA FILM when The EVA FILM are circling to be a roll.

Mosquitoes
This is about the environment of EVA FILM factory; they should kill pests in workshop, and avoid other mosquitoes to come in.

Black Spots
This is also about producing procedure in EVA FILM factory, the workers should wear gloves or wash hands often, to make sure when they touch the EVA FILM, and their hands are clean.

For colorful EVA FILM, the color is not even
It’s about the procuring procedure of EVA FILM; maybe the procedure of mixing the colorant is not good enough.

Knocked marks
This is caused in the transportation. The carrier is not carefully or the EVA FILM is not packaged by wooden boxes.

Yellowing of EVA
It’s about the formula of EVA FILM, which means the quality of the EVA FILM is not good. So you should buy small trial order before you make big quantity order when you work with a new supplier.

Based on the transparence, the EVA FILM can divide into:
(CNCGLASS only produce super-transparent EVA Film.)
Ordinary transparent and super transparent.
Ordinary transparent, of course, means the transparence is good but less than super transparent. Most ordinary transparent EVA FILM is used in laminating with fabric and papers.
And generally speaking, the ordinary transparent EVA FILM are INDOOR EVA FILM. And super transparent EVA FILMs are outdoor EVA FILM.
But because some people need the super transparence but not the UV blocked rate, some EVA FILM manufacturer make the INDOOR super transparent EVA FILM.

All rights reserved by CNC GLASS INTERLAYER TECH:
Product 1]CNC-Force EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS eva@evafilms.com
Product 2]CNC-SmartSMART FILM FOR PRIVACY SWITCHABLE GLASS smartfilm@smartestglass.com
Product 3]CNC-Shield PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS pvb@pvbfilm.net
Web: www.CNCglass.com www.CNCnext.com
Mail: cnc@cncglass.com
benext77@gmail.com

CHINA GLASS EXPO

China Glass Expo Glass Files Sharing
Sharing is Great!
Sharing Keeps Glass Great!

Shared by:
UCOLIN SILICONE TECH
(1)[]Silicone Vacuuming Bag for EVA Glass Laminating Machine/Privacy Glass Laminating http://www.tenkung.com/
(2)[]Silicone Sheet for EVA Glass Laminating Machine
(3)[]Silicone Bag for PVB Glass Laminating Auto[]clave
silicone@silicone4.com
uc@ucolin.com
(4)[]Silicone Rubber Sheet for Solar Cell Module Laminating Machine
(5)[]Silicone Sheet for Wood Door Vacuum Laminating Machine Vacuum Press Machine Vacuum Filming Machine
silicone@siliconn.com
uc@ucolin.com
umewe360@gmail.com
umewe360@hotmail.com
Skype: WECAN360

Silicone Rubber Sheet for Solar Cell Module Laminating Machine and Encapsulation Line

+Made of self[]developed special formula to high improve the properties of silicone sheet like: acid[]resistance, other chemical substance[]resistance, high temperature resistance, and great tensile strength and tear/scrape resistance,

Silicone Rubber Sheet for Muti[]layer Laminator, Fully Cycle Automatic Laminator, BIPV Laminator, Semi[]automatic Laminator, a[]Si Module Laminator

+Product Description：
Great Acid resistance
Chemical agents resistance，
High temperature resistance，
Great tensile strength
Great tearing strength
Highly prolong useful life

Silicone Rubber Sheet for Muti[]layer Laminator, Fully Cycle Automatic Laminator, BIPV Laminator, Semi[]automatic Laminator, a[]Si Module Laminator

+PRODUCT SPECIFICATIONS:
Thickness: 3mm thickness (If you need other thickness, please inquiry us.)
Maximum width: 3800mm without any join
Customization available according to customer’s requirements.

Silicone Sheet for Muti[]layer Laminator, Fully Cycle Automatic Laminator, BIPV Laminator, Semi[]automatic Laminator, a[]Si Module Laminator

UCOLIN SILICONE TECH
[]Silicone Rubber Sheet for Solar Cell Module Laminating Machine and Encapsulation Line
(2)[]Silicone Sheet for EVA Glass Laminating Machine
(3)[]Silicone Bag for PVB Glass Laminating Auto[]clave
(4)[]Silicone Vacuuming Bag for EVA Glass Laminating Machine/Privacy Glass Laminating
(5)[]Contact Us: uc@ucolin.com / www.ucolin.com
umewe360@gmail.com/ umewe360@hotmail.com

Useful Advice for Solar Cell Module Lamination:

+ EVA FILM (ETHYLENE VINYL ACETATE) and PVB FILM (POLYVINYL BUTYRAL) is needed for solar cell module lamination as a hot melt adhesive film.

+ Silicone Sheet Installation Advice:
[]Choose unique anti[]folded design in the upper chamber, that can prolong the use life of silicone sheet and improve the quality of the solar modules.
[]Vacuum sealing tape is installed upside, which enables installation easier and and prolong the use life of vacuum sealing tape.
[]Aluminum frame flange can speed up easy connection when unloading clamps, which make replacement of silicone sheet more efficiency, only need about ten minutes.

+Best Vacuum System
With best silicone sheet, you also need other best device to build a best vacuum system, and here are 3 tips.
[]Choose Germany technology for vacuum system.
[]Choose best brand vacuum pump. German LEYBOLD brand vacuum pump is very good at high vacuum speed and low work noise.
[]German EBRO brand’s butterfly[]shaped vacuum valve is well known as reliable working stability and long use life and easy maintenance.

+ Building Fully[]Automatic Turn[]Key Line
To build fully[]automatic turn[]key line, you need following devices:
[]Glass Washer
[]Soldering Stringer
[]EVA, TPT Cutting Machine
[]Lay[]up Equipment
[]Laminator
[]Edge Trimmer Machine
[]Online Tester
[]Corner Press/ Framing Press Equipment
[]Washer Equipment
[]Simulator Tester
[]Simulator Tester
[]Packaging Machine